H&R Cancellation kit for adaptive shocks Volkswagen Eos/Golf VI/Passat/Scirocco/Sharan 2006-2017
H&R Cancellation kit for adaptive shocks Volkswagen Eos, Golf VI, Passat, Scirocco, Sharan 2006-2017H&R cancellation kits prevent error messages of the on-board electronics, which would occur when replacing active suspension system components with passive suspension components. The modules are connected to the original damper electronics and the control and regulation systems remain fully intact, only an error message in the cockpit is prevented.H&R cancellation kits are available for a wide range of vehicles. Installation is quick and easy thanks to the installation instructions supplied. It shows where the interfaces are located in the vehicle. The Cancellation Kit Modules utilize the existing connectors, reversal to the original suspension system is possible without a trace by simply plugging the original equipment back in so, for example, in the case of leased vehicles, a trace-free removal is possible at any time. All plug connections of the H&R cancellation kits are made in OEM quality and are watertight.The system can be used for suspensions from other manufacturers as well as for original sport suspensions.
H&R Cancellation kit for adaptive shocks Volkswagen Polo incl. GTI (AW) & Seat Ibiza (KJ) 2017- & Audi A1 Sportback (GB) & Skoda Scala (NW) 2018-
H&R Cancellation kit for adaptive shocks Volkswagen Polo incl. GTI (AW), Seat Ibiza (KJ) 2017-, Audi A1 Sportback (GB), Skoda Scala (NW) 2018-H&R cancellation kits prevent error messages of the on-board electronics, which would occur when replacing active suspension system components with passive suspension components. The modules are connected to the original damper electronics and the control and regulation systems remain fully intact, only an error message in the cockpit is prevented.H&R cancellation kits are available for a wide range of vehicles. Installation is quick and easy thanks to the installation instructions supplied. It shows where the interfaces are located in the vehicle. The Cancellation Kit Modules utilize the existing connectors, reversal to the original suspension system is possible without a trace by simply plugging the original equipment back in so, for example, in the case of leased vehicles, a trace-free removal is possible at any time. All plug connections of the H&R cancellation kits are made in OEM quality and are watertight.The system can be used for suspensions from other manufacturers as well as for original sport suspensions.
H&R Coilover A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020-
H&R Coilover A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020- incl. cancellation kit H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments. Product benefits:Monotube gas shock absorbers for precise handling response H&R precision wound progressive coil springs Adjustment wrenches included Trapezoid threaded shock body allows almost infinite height adjustment Durable corrosion protection With TÜV approvalHigh quality components for long service lifeMade in Germany Suitable for: Audi A3 Sportback/Sedan Type GY, 2WD, from 1001kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 35-60mm / Rear axle 35-60mm Volkswagen Golf VIII Type CD, incl. GTD/GTI/GTI Clubsport, 2WD, from 1001kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 25-50mm / Rear axle 25-50mm Notes: 1) Cars with OE sport suspension may be lowered less 2) The installation of this suspension into cars with an electronical damping adjustment (DCC, MRC, etc) must be done in an authorized specific workshop. The signal of the electronical damping adjustment in the display has to be deactivated
H&R Coilover A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020-
H&R Coilover A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020- H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments. Product benefits:Monotube gas shock absorbers for precise handling response H&R precision wound progressive coil springs Adjustment wrenches included Trapezoid threaded shock body allows almost infinite height adjustment Durable corrosion protection With TÜV approvalHigh quality components for long service lifeMade in Germany Suitable for: Audi A3 Sportback/Sedan Type GY, 2WD, from 1001kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 35-60mm / Rear axle 35-60mm Volkswagen Golf VIII Type CD, incl. GTD/GTI/GTI Clubsport, 2WD, from 1001kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 25-50mm / Rear axle 25-50mm Notes: 1) Cars with OE sport suspension may be lowered less 2) The installation of this suspension into cars with an electronical damping adjustment (DCC, MRC, etc) must be done in an authorized specific workshop. The signal of the electronical damping adjustment in the display has to be deactivated
H&R Coilover Audi A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020-
H&R Coilover Audi A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020- incl. cancellation kit H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments. Product benefits:Monotube gas shock absorbers for precise handling response H&R precision wound progressive coil springs Adjustment wrenches included Trapezoid threaded shock body allows almost infinite height adjustment Durable corrosion protection With TÜV approvalHigh quality components for long service lifeMade in Germany Suitable for: Audi A3 Sportback/Sedan Type GY, 2WD, till 1000kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 35-60mm / Rear axle 35-60mm Volkswagen Golf VIII Type CD, incl. GTD/GTI/GTI Clubsport, 2WD, till 1000kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 25-50mm / Rear axle 25-50mm Notes: 1) Cars with OE sport suspension may be lowered less 2) The installation of this suspension into cars with an electronical damping adjustment (DCC, MRC, etc) must be done in an authorized specific workshop. The signal of the electronical damping adjustment in the display has to be deactivated
H&R Coilover Audi A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020-
H&R Coilover Audi A3 Sportback & Sedan (GY) VW Golf VIII (CD) 2WD (Multilink) Ø 50mm 2020- H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments. Product benefits:Monotube gas shock absorbers for precise handling response H&R precision wound progressive coil springs Adjustment wrenches included Trapezoid threaded shock body allows almost infinite height adjustment Durable corrosion protection With TÜV approvalHigh quality components for long service lifeMade in Germany Suitable for: Audi A3 Sportback/Sedan Type GY, 2WD, till 1000kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 35-60mm / Rear axle 35-60mm Volkswagen Golf VIII Type CD, incl. GTD/GTI/GTI Clubsport, 2WD, till 1000kg Front axle load, only with Multilink RA, only for front strut diameter Ø 50mm, 2020- Front axle 25-50mm / Rear axle 25-50mm Notes: 1) Cars with OE sport suspension may be lowered less 2) The installation of this suspension into cars with an electronical damping adjustment (DCC, MRC, etc) must be done in an authorized specific workshop. The signal of the electronical damping adjustment in the display has to be deactivated
H&R Coilover Kit VW Bus T5 03/2003– including Facelift 2WD & 4WD Front 50–80mm / Rear 40–70mm
Product information "H&R Coilover Kit VW Bus T5 03/2003– including Facelift 2WD & 4WD Front 50–80mm / Rear 40–70mm" H&R Coilover Kit
H&R Coilover Kit VW Lupo GTi 05/2000– Front 30–60mm / Rear 20–50mm
Product information "H&R Coilover Kit VW Lupo GTi 05/2000– Front 30–60mm / Rear 20–50mm" H&R Coilover Kit
H&R Coilover Kit VW New Beetle + Cabriolet Front 30–70mm / Rear 20–62mm
Product information "H&R Coilover Kit VW New Beetle + Cabriolet Front 30–70mm / Rear 20–62mm" H&R Coilover Kit
H&R Coilover Kit VW Passat Sedan 3B(G) up to 142 kW 10/1996–
Product information "H&R Coilover Kit VW Passat Sedan 3B(G) up to 142 kW 10/1996–" H&R Coilover Kit
H&R Coilover Kit VW Passat Variant 3B(G) up to 142 kW 06/1997–
Product information "H&R Coilover Kit VW Passat Variant 3B(G) up to 142 kW 06/1997–" H&R Coilover Kit
H&R Coilover Kit VW Polo 9N / Skoda Fabia Extremely Low!
Product information "H&R Coilover Kit VW Polo 9N / Skoda Fabia Extremely Low!" H&R Coilover Kit Suitable for: VW Polo 9N / Skoda Fabia Extremely low setup
H&R Coilover VW Golf VIII (CD) 1.4 eHybrid/GTE & Seat & Cupra Leon (KL) 1.4 e-Hybrid (HB) & Audi A3 40/45 TFSIe Sedan/SB (FA-Strut Ø 55mm) 2020-
H&R Coilover VW Golf VIII (CD) 1.4 eHybrid/GTE & Seat & Cupra Leon (KL) 1.4 e-Hybrid (HB) & Audi A3 40/45 TFSIe Sedan/SB (FA-Strut Ø 55mm) 2020- H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments. Product benefits:Monotube gas shock absorbers for precise handling response H&R precision wound progressive coil springs Adjustment wrenches included Trapezoid threaded shock body allows almost infinite height adjustment Durable corrosion protection With TÜV approvalHigh quality components for long service lifeMade in Germany Suitable for: Volkswagen Golf VIII Type CD, 2020-, GTE/1.4 eHybrid, Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, incl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Seat Leon Hatchback Type KL, 2020-, 1.4 e-Hybrid incl. FR, Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, iincl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Cupra Leon Hatchback Type KL, 2020-, 1.4 e-Hybrid incl. VZ, Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, iincl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Audi A3 Sportback/Sedan Type GY, 2020-, 40/45 TFSIe (2WD), Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, iincl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Notes: 1) Cars with OE sport suspension may be lowered less 2) The installation of this suspension into cars with an electronical damping adjustment (DCC, MRC, etc) must be done in an authorized specific workshop. The signal of the electronical damping adjustment in the display has to be deactivated
H&R Coilover VW Golf VIII (CD) 1.4 eHybrid/GTE & Seat & Cupra Leon (KL) 1.4 e-Hybrid (HB) & Audi A3 40/45 TFSIe Sedan/SB (FA-Strut Ø 55mm) 2020-
H&R Coilover VW Golf VIII (CD) 1.4 eHybrid/GTE & Seat & Cupra Leon (KL) 1.4 e-Hybrid (HB) & Audi A3 40/45 TFSIe Sedan/SB (FA-Strut Ø 55mm) 2020- incl. cancellation kit H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments. Product benefits:Monotube gas shock absorbers for precise handling response H&R precision wound progressive coil springs Adjustment wrenches included Trapezoid threaded shock body allows almost infinite height adjustment Durable corrosion protection With TÜV approvalHigh quality components for long service lifeMade in Germany Suitable for: Volkswagen Golf VIII Type CD, 2020-, GTE/1.4 eHybrid, Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, incl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Seat Leon Hatchback Type KL, 2020-, 1.4 e-Hybrid incl. FR, Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, iincl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Cupra Leon Hatchback Type KL, 2020-, 1.4 e-Hybrid incl. VZ, Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, iincl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Audi A3 Sportback/Sedan Type GY, 2020-, 40/45 TFSIe (2WD), Only for Multilink RA, only for front strut diameter Ø 55mm, FA-Load from 1001kg, iincl. adaptive shocks/sport suspension, Front axle 40-60mm / Rear axle 45-70mm Notes: 1) Cars with OE sport suspension may be lowered less 2) The installation of this suspension into cars with an electronical damping adjustment (DCC, MRC, etc) must be done in an authorized specific workshop. The signal of the electronical damping adjustment in the display has to be deactivated
H&R Height Adjustable Spring System Audi A3 (GY) Sedan & Sportback (4WD) 40 TFSI/40 TDI/S3 quattro 2020- FA15-40/RA15-30mm & Volkswagen Golf VIII (CD) R 4motion Hatchback 2020- FA15-25/RA10-30mm
H&R Height Adjustable Spring System Audi A3 (GY) Sedan & Sportback (4WD) 40 TFSI/40 TDI/S3 quattro 2020- FA15-40/RA15-30mm & Volkswagen Golf VIII (CD) R 4motion Hatchback 2020- FA15-25/RA10-30mm These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Audi S3 Sedan & Sportback Type GY, quattro (4WD), 2020-, S3 Quatro, incl. Adaptive shocks, Front axle 20-30mm / Rear axle 10-30mm Audi A3 Sedan & Sportback Type GY, quattro (4WD), 2020-, 40 TFSI/40 TDI, incl. Adaptive shocks, Front axle 30-40mm / Rear axle 20-40mm Volkswagen Golf VIII Hatchback Type CD, 4motion (4WD), 2020-, 2.0 TFSI R 4motion, incl. Adaptive shocks, Front axle 15-25mm / Rear axle 10-30mm
H&R Height Adjustable Spring System Volkswagen Golf VIII & Seat Leon HB - 2020- (2WD) from 1001kg FA-Load (Twist Beam) FA25-40/RA20-50mm
H&R Height Adjustable Spring System Volkswagen Golf VIII & Seat Leon HB - 2020- (2WD) from 1001kg FA-Load (Twist Beam) FA25-40/RA20-50mm These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Volkswagen Golf VIII (CD) 2020-, 2WD, from 1001kg Front axle load, only with twist beam RA, incl. adaptive shocks, incl. Sport suspension, Front axle 30-40mm / Rear axle 30-50mm Seat Leon HB (KL) 2020-, incl. FR, excl. e-Hybrid, from 1001kg Front axle load, only with twist beam RA, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm
H&R Height Adjustable Spring System Volkswagen Golf VIII & Seat Leon HB incl. FR - 2020- (2WD) (Twist Beam) FA25-40/RA20-50mm - up to 1000kg FA-Load
H&R Height Adjustable Spring System Volkswagen Golf VIII & Seat Leon HB incl. FR - 2020- (2WD) (Twist Beam) FA25-40/RA20-50mm - up to 1000kg FA-LoadThese springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function.- Sporty appearance- Lowered center of gravity- Individual lowering on the original adaptive or electronic adjustable shock absorbers- The original damping adjustment of the shocks maintains without limitation- Improved handling characteristics- With approval- No alignment of the original electronic system necessary:Volkswagen Golf VIII (CD) 2020-, 2WD, up to 1000kg Front axle load, only with twist beam RA, incl. adaptive shocks, incl. Sport suspension, Front axle 30-40mm / Rear axle 30-50mmSeat Leon HB (KL) 2020-, incl. FR, excl. e-Hybrid, up to 1000kg Front axle load, only with twist beam RA, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm
H&R Height Adjustable Spring System Volkswagen Golf VIII 1.4 e-Hybrid incl. GTE & Seat/Cupra Leon (KL) 1.4 e-Hybrid & Audi A3 40/45 TFSIe (2WD) 2020- - FA35-50/RA30-50mm - from 1001kg FA-Load (Multilink)
H&R Height Adjustable Spring System Volkswagen Golf VIII 1.4 e-Hybrid incl. GTE & Seat/Cupra Leon (KL) Sportstourer 1.4 e-Hybrid & Audi A3 40/45 TFSIe (2WD) 2020- - FA35-50/RA30-50mm - from 1001kg FA-Load (Multilink) These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Volkswagen Golf VIII Hatchback (CD) 2020-, 1.4 e-Hybrid incl. GTE, from 1001kg Front axle load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 40-50mm / Rear axle 35-45mm Seat Leon Hatchback (KL) 2020-, 1.4 e-Hybrid incl. FR, from 1001kg Front axle load, incl. adaptive shocks, incl. sport suspension, Front axle 35-45mm / Rear axle 30-40mm Cupra Leon Hatchback (KL) 2020-, 1.4 e-Hybrid incl. VZ, from 1001kg Front axle load, incl. adaptive shocks, incl. sport suspension, Front axle 35-45mm / Rear axle 30-40mm Audi A3 Sedan/Sportback (GY) 2020-, 40/45 TFSIe 2WD, from 1001kg Front axle load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 35-45mm / Rear axle 30-40mm
H&R Height Adjustable Spring System Volkswagen Golf VIII inkl. GTD, GTI, GTI Clubsport & Audi A3 Limousine/Sportback & Seat/Cupra Leon HB incl. FR, VZ - 2020- (2WD) (Multilink) FA20-40/RA15-50mm - FA-Load up to 1000kg
H&R Height Adjustable Spring System Volkswagen Golf VIII inkl. GTD, GTI, GTI Clubsport & Audi A3 Limousine/Sportback & Seat/Cupra Leon HB incl. FR, VZ - 2020- (2WD) (Multilink) FA20-40/RA15-50mm - FA-Load up to 1000kgThese springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function.- Sporty appearance- Lowered center of gravity- Individual lowering on the original adaptive or electronic adjustable shock absorbers- The original damping adjustment of the shocks maintains without limitation- Improved handling characteristics- With approval- No alignment of the original electronic system necessary:Volkswagen Golf VIII (CD) 2020-, 2WD, up to 1000kg Front axle load, only with Multilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 30-40mm / Rear axle 30-50mmVolkswagen Golf VIII GTD, GTI, GTI Clubsport (CD) 2020-, up to 1000kg Front axle load, incl. adaptive shocks, incl. sport suspension, Front axle 20-30mm / Rear axle 15-30mmAudi A3 Sedan/Sportback (GY) 2020-, 2WD, up to 1000kg Front axle load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 30-40mm / Rear axle 30-50mmSeat Leon Hatchback (KL) 2020-, 2WD, incl. FR, excl. e-Hybrid, up to 1000kg Front axle load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 25-35mm / Rear axle 20-40mmCupra Leon Hatchback (KL) 2020-, 2WD, incl. VZ, excl. e-Hybrid, up to 1000kg Front axle load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 25-35mm / Rear axle 20-40mm
H&R Height Adjustable Spring System Volkswagen Golf VIII inkl. GTD, GTI, GTI Clubsport & Audi A3 Limousine/Sportback & Seat/Cupra Leon HB incl. FR, VZ - 2020- (2WD) (Multilink) FA20-40/RA15-50mm - from 1001kg FA-Load
H&R Height Adjustable Spring System Volkswagen Golf VIII inkl. GTD, GTI, GTI Clubsport & Audi A3 Limousine/Sportback & Seat/Cupra Leon HB incl. FR, VZ - 2020- (2WD) (Multilink) FA20-40/RA15-50mm - from 1001kg FA-Load These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Volkswagen Golf VIII (CD) 2020-, 2WD, from 1001kg FA-Load, only with Multilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 30-40mm / Rear axle 30-50mm Volkswagen Golf VIII GTD, GTI, GTI Clubsport (CD) 2020-, from 1001kg FA-Load, incl. adaptive shocks, incl. sport suspension, Front axle 20-30mm / Rear axle 15-30mm Audi A3 Sedan/Sportback (GY) 2020-, 2WD, from 1001kg FA-Load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 30-40mm / Rear axle 30-50mm Seat Leon Hatchback (KL) 2020-, 2WD, incl. FR, excl. e-Hybrid, from 1001kg FA-Load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 25-35mm / Rear axle 20-40mm Cupra Leon Hatchback (KL) 2020-, 2WD, incl. VZ, excl. e-Hybrid, from 1001kg FA-Load, only with Mulktilink RA, incl. adaptive shocks, incl. sport suspension, Front axle 25-35mm / Rear axle 20-40mm
H&R Height Adjustable Spring System Volkswagen Golf VIII Variant & Seat/Cupra Leon (KL) Sportstourer incl. FR, VZ & Skoda Octavia (NX) Sedan/Combi - (excl. Plug in hybrid) 2020- FA25-35/RA20-40mm - from 1001kg FA-Load
H&R Height Adjustable Spring System Volkswagen Golf VIII Variant & Seat/Cupra Leon (KL) Sportstourer incl. FR, VZ & Skoda Octavia (NX) Sedan/Combi - (excl. Plug in hybrid) 2020- FA25-35/RA20-40mm - from 1001kg FA-Load These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Volkswagen Golf VIII Variant (CG5) 2020-, excl. Plug-in-Hybrid, from 1001kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm Seat Leon Sportstourer (KL) 2020-, incl. FR, excl. e-Hybrid, from 1001kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm Cupra Leon Sportstourer (KL) 2020-, incl. VZ, excl. e-Hybrid, from 1001kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm Skoda Octavia Sedan/Combi (NX), incl. RS, excl. Plug in Hybrid, from 1001kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm
H&R Height Adjustable Spring System Volkswagen Golf VIII Variant & Seat/Cupra Leon (KL) Sportstourer incl. FR, VZ & Skoda Octavia (NX) Sedan/Combi - (excl. Plug in hybrid) 2020- FA25-35/RA20-40mm - up to 1000kg FA-Load
H&R Height Adjustable Spring System Volkswagen Golf VIII Variant & Seat/Cupra Leon (KL) Sportstourer incl. FR, VZ & Skoda Octavia (NX) Sedan/Combi - (excl. Plug in hybrid) 2020- FA25-35/RA20-40mm - up to 1000kg FA-LoadThese springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function.- Sporty appearance- Lowered center of gravity- Individual lowering on the original adaptive or electronic adjustable shock absorbers- The original damping adjustment of the shocks maintains without limitation- Improved handling characteristics- With approval- No alignment of the original electronic system necessary:Volkswagen Golf VIII Variant (CG5) 2020-, excl. Plug-in-Hybrid, up to 1000kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mmSeat Leon Sportstourer (KL) 2020-, incl. FR, excl. e-Hybrid, up to 1000kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mmCupra Leon Sportstourer (KL) 2020-, incl. VZ, excl. e-Hybrid, up to 1000kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mmSkoda Octavia Sedan/Combi (NX), incl. RS, excl. Plug in Hybrid, up to 1000kg Front axle load, incl. adaptive shocks, incl. Sport suspension, Front axle 25-35mm / Rear axle 20-40mm
H&R Height Adjustable Spring System Volkswagen ID. Buzz + ID. Buzz Cargo 2022- FA40/RA25-40mm
H&R Height Adjustable Spring System Volkswagen ID. Buzz + ID. Buzz Cargo 2022- FA40/RA25-40mm These springs offer a variable lowering while retaining the original adaptive or damping-adjustable shocks. The original shock absorbers can be further used without any limitation in function. - Sporty appearance - Lowered center of gravity - Individual lowering on the original adaptive or electronic adjustable shock absorbers - The original damping adjustment of the shocks maintains without limitation - Improved handling characteristics - With approval - No alignment of the original electronic system necessary : Volkswagen ID. Buzz Pro 150kW (EBN) 2022- FA40/RA25-30 Volkswagen ID. Buzz Cargo 150kW (EB) 2022- FA40/RA30-40mm
H&R Height Adjustable Spring System Volkswagen Transporter T5/T6/T6.1 FA45/60/RA20-50mm
H&R Height-Adjustable Spring Systems for VW Transporter T5, T6 & T6.1 – Sporty Lowering with OEM Comfort Experience maximum performance and sporty styling with the H&R height-adjustable spring systems – specially developed for the Volkswagen Transporter, Multivan, and California models of the T5, T6, and T6.1 series. These innovative spring systems allow variable lowering while maintaining full compatibility with factory adaptive or electronically adjustable dampers. Advantages of H&R Height-Adjustable Spring Systems Individually adjustable lowering in the range front axle 45–60 mm / rear axle 20–50 mm Sporty appearance and improved road handling Retains full OEM damper functionality – no performance loss Suitable with or without adaptive damping control Compatible with Standard, Dynamic, and Sport suspension setups Not suitable for rough-road suspension Optimized driving dynamics for more precise handling Supplied with TÜV-approved certificate (Teilegutachten) No modification of vehicle electronics required Important Note Depending on engine type, transmission, equipment level, and vehicle tolerances, the actual lowering may vary from the stated values. Compatibility The H&R height-adjustable spring systems are suitable for the following models: Volkswagen Transporter / Multivan / California T5 (7HM, 7HC, HK, 7HKX0, 7J0, 7HMA, 7HCA) Model years: 2003–2015 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 20–50 mm Volkswagen Transporter / Multivan / Kombi / California / California Beach T6 (7HC, 7HMA, 7J0) Model years: 2015–2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 20–50 mm Volkswagen Transporter / Multivan / Kombi T6.1 (7HC, 7J0) Model years: from 2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 45 mm / Rear 20–50 mm Volkswagen California / California Beach T6.1 (7HMA) Model years: from 2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 30–50 mm Conclusion With the H&R height-adjustable spring systems for the VW Transporter T5, T6, and T6.1, you combine sporty design, precise handling, and maximum ride comfort. Perfect for drivers who want individual lowering without compromising comfort.
H&R Monotube Coil Over Kit Audi A3/A3 Sportback/S3/TT/TTS/Seat Leon/Skoda Octavia/Volkswagen Golf VII/Passat 2013-
H&R Monotube Coil Over Kit Audi A3/A3 Sportback/S3/TT/TTS/Seat Leon/Skoda Octavia/Volkswagen Golf VII/Passat 2013-H&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 Quattro including Sportback Quattro, including Sedan Type 8V, 4WD 2013- Front axle 40-60mm/Rear axle 30-50mmAudi S3 including Sportback, including Sedan, Type 8V, 4WD 2013- Front axle 25-40mm/Rear axle 20-40mmAudi TT/TTS Coupé Quattro Type 8S, 4WD 2013- Front axle 35-55mm/Rear axle 25-45mmSeat Leon Stationwagon including FR Type 5F, 2WD 2013- Front axle 30-45mm/Rear axle 30-50mmSkoda Octavia RS Sedan/Combi Type 5E, 2WD 2013- Front axle 40-55mm/Rear axle 30-50mmSkoda Octavia Sedan/Combi Type 5E, 4WD, except for DCC, 2013- Front axle 45-60mm/Rear axle 45-65mmSkoda Octavia RS Sedan/Combi Type 5E, 4WD, except for DCC, 2013- Front axle 40-55mm/Rear axle 30-50mmVolkswagen Golf VII R/R Variant Type AU, 4WD 2013- Front axle 10-30mm/Rear axle 20-45mmVolkswagen Golf VII Variant including GTD Type AUV, 2WD 2013- Front axle 40-60mm/Rear axle 30-50mmVolkswagen Passat Sedan Type 3C (B8), 2WD 2013- Front axle 40-60mm/Rear axle 30-50mmFrom 986kg Front axle load. Only for strut clamp Ø55mm. Only for multilink rearaxle.
H&R Monotube Coil Over Kit Audi A3/S3/TT/TTS/Seat Leon ST/Skoda Octavia RS/Volkswagen Golf VII/Passat 2013- up to 985kg FA-Load Ø55mm
H&R Monotube Coil Over Kit Audi A3/S3/TT/TTS/Seat Leon ST/Skoda Octavia RS/Volkswagen Golf VII/Passat 2013- up to 985kg FA-Load Ø55mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 Quattro including Sportback Quattro, including Sedan Type 8V, 4WD 2013- Front axle 40-60mm/Rear axle 30-50mmAudi S3 including Sportback, including Sedan, Type 8V, 4WD 2013- Front axle 25-40mm/Rear axle 20-40mmAudi TT/TTS Coupé Quattro Type 8S, 4WD 2013- Front axle 35-55mm/Rear axle 25-45mmSeat Leon ST/Stationwagon including FR Type 5F, 2WD 2013- Front axle 30-45mm/Rear axle 30-50mmSkoda Octavia RS Sedan/Combi Type 5E, 2WD 2013- Front axle 40-55mm/Rear axle 30-50mmSkoda Octavia Sedan/Combi Type 5E, 4WD, up to 985kg Front axle load, except for DCC, Front axle strut clamp ø 55mm 2013- Front axle 45-60mm/Rear axle 45-65mmVolkswagen Golf VII R/R Variant Type AU, 4WD 2013- Front axle 10-30mm/Rear axle 20-45mmVolkswagen Golf VII Variant including GTD Type AUV, 2WD 2013- Front axle 40-60mm/Rear axle 30-50mmVolkswagen Passat Sedan Type 3C (B8) 2WD 2013- Front axle 40-60mm/Rear axle 30-50mmUp to 985kg Front axle load. Only for strut clamp Ø55mm. Only for multilink rearaxle.
H&R Monotube Coil Over Kit Audi A3/Seat Altea/Leon/Toledo/Volkswagen EOS/Golf V/Jetta V/Passat 2003- Ø55mm FA40-80/RA40-70mm
H&R Monotube Coil Over Kit Audi A3/Seat Altea/Leon/Toledo/Volkswagen EOS/Golf V/Jetta V/Passat 2003- Ø55mm FA40-80/RA40-70mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3/A3 Sportback Type 8P/8PA/8PB, 2WD, Low version 2003-Seat Altea Type 5P/5PN, 2WD, Low version 2004-Seat Leon including FR/Cupra Type 1P/1PN, 2WD, Low version 2004-Seat Toledo Type 5P, 2WD, Low version 2004- Front axleVolkswagen EOS Type 1F, 2WD 2006-Volkswagen Golf V including GTI/Golf Plus Type 1K/1KM/1KP, 2/4WD, Low version 2003-Volkswagen Jetta V Type 1KM, 2/4WD, Low version 2003-Volkswagen Passat Sedan + CC including Passat Sedan 4WD Type 3C/3CC/3c, 2WD, very low version 2005-Only for strut clamp Ø55mm.Front axle 40-80mm/Rear axle 40-70mm: Seat Altea/Leon/Toledo/Volkswagen PassatFront axle 50-80mm/Rear axle 50-70mm: Audi A3/Volkswagen EOS/Golf V/Jetta V
H&R Monotube Coil Over Kit Audi A3/Seat Leon/Cupra/Toledo/Skoda Octavia/Volkswagen Beetle/Bora/Golf IV 1996- from 910kg FA-Load FA40-70/RA20-60mm
H&R Monotube Coil Over Kit Audi A3/Seat Leon/Cupra/Toledo/Skoda Octavia/Volkswagen Beetle/Bora/Golf IV 1996- from 910kg FA-Load FA40-70/RA20-60mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 Type 8L, 2WD, up to 132kW 1996-2003Seat Leon/Cupra Type 1M, 2WD, exclusive Cupra R 1999-Seat Toledo Type 1M, 2WD, exclusive Cupra R 1999-Skoda Octavia Sedan Type 1U, 2WD, exclusive RS model 1997-Volkswagen Beetle/Beetle Convertible Type 9C/1Y/1C 1997-Volkswagen Bora Sedan Type 1J, 2WD 1997-Volkswagen Golf IV Sedan Type 1J, 2WD 1997-Front axle 40-70mm/Rear axle 20-60mm.From 911kg Front axle load.
H&R Monotube Coil Over Kit Audi A3/Seat Leon/Cupra/Toledo/Skoda Octavia/Volkswagen Beetle/Bora/Golf IV 1996- up to 910kg FA-Load FA40-70/RA20-60mm
H&R Monotube Coil Over Kit Audi A3/Seat Leon/Cupra/Toledo/Skoda Octavia/Volkswagen Beetle/Bora/Golf IV 1996- up to 910kg FA-Load FA40-70/RA20-60mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 Type 8L, 2WD 1996-2003Seat Leon/Cupra Type 1M, 2WD, exclusive Cupra R 1999-Seat Toledo Type 1M, 2WD, exclusive Cupra R 1999-Skoda Octavia Sedan Type 1U, 2WD, exclusive RS models 1997-Volkswagen Beetle/Beetle Convertible Type 9C/1Y/1C 1997-Volkswagen Bora Sedan Type 1J 1997-Volkswagen Golf IV Sedan Type 1J 1997-Front axle 40-70mm/Rear axle 20-60mm.Up to 910kg Front axle load.
H&R Monotube Coil Over Kit Audi A3/TT/Seat Leon/Volkswagen Golf VII 2WD/GTI TCR 2012- from 986kg FA-Load Ø55mm FA35-60/RA25-50mm
H&R Monotube Coil Over Kit Audi A3/TT/Seat Leon/Volkswagen Golf VII 2WD/GTI TCR 2012- from 986kg FA-Load Ø55mm FA35-60/RA25-50mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 including Sportback/Sedan Type 8V, 2WD 2012-Audi TT Coupé Type 8S 2WD 2012-Audi TT Roadster Type 8S, 2WD 2012-Seat Leon including SC/FR Type 5F 2WD 2012-Volkswagen Golf VII Sedan including GTD/GTI/GTI Performance/GTI Clubsport Type AU, 2WD 2012-Volkswagen Golf VII GTI TCR Type AU 2019From 986kg Front axle load. Only for strut clamp Ø55mm. Only for cars with multilink rearaxle.Front axle 40-60/Rear axle 30-50mm Audi A3/Seat/VolkswagenFront axle 35-55/Rear axle 25-45mm Audi TT (Roadster)
H&R Monotube Coil Over Kit Audi A3/TT/Seat Leon/Volkswagen Golf VII 2WD/GTI TCR 2012- up to 985kg FA-Load Ø55mm FA35-60/RA25-50mm
H&R Monotube Coil Over Kit Audi A3/TT/Seat Leon/Volkswagen Golf VII 2WD/GTI TCR 2012- up to 985kg FA-Load Ø55mm FA35-60/RA25-50mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 including Sportback/Sedan Type 8V, 2WD 2012-Audi TT Coupé Type 8S 2WD 2012-Audi TT Roadster Type 8S, 2WD 2012-Seat Leon including SC/FR Type 5F 2WD 2012-Volkswagen Golf VII Sedan including GTD/GTI/GTI Performance/GTI Clubsport Type AU, 2WD 2012-Volkswagen Golf VII GTI TCR Type AU, 2019Up to 985kg Front axle load. Only for strut clamp Ø55mm. Only for cars with multilink rearaxle.Front axle 40-60/Rear axle 30-50mm Audi A3/Seat/VolkswagenFront axle 35-55/Rear axle 25-45mm Audi TT (Roadster)
H&R Monotube Coil Over Kit Audi A3/Volkswagen Golf VII 2WD 2012- FA40-60/RA30-50mm
H&R Monotube Coil Over Kit Audi A3/Volkswagen Golf VII 2WD 2012- FA40-60/RA30-50mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 including Sportback including Sedan Type 8V, 2WD, only for strut clamp Ø50mm 2012-Volkswagen Golf VII Sedan including GTD/GTI (performance) Type AU, 2WD, only for strut clamp Ø50mm 2012-Volkswagen Golf VII Sedan Type AU, 2WD, Only for strut clamp Ø55mm 2012- Front axle 40-60mm/Rear axle 30-50mm.Up to 985kg Front axle load. Only for cars with multilink rearaxle.
H&R Monotube Coil Over Kit Audi A3/Volkswagen Golf VII 2WD 2012- from 986kg FA-Load Ø50mm FA40-60/RA30-50mm
H&R Monotube Coil Over Kit Audi A3/Volkswagen Golf VII 2WD 2012- from 986kg FA-Load Ø50mm FA40-60/RA30-50mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Audi A3 including Sportback including Sedan Type 8V, 2WD 2012-Volkswagen Golf VII Sedan including GTD/GTI/GTI Performance Type AU, 2WD 2012-Front axle 40-60mm/Rear axle 30-50mm.From 986kg Front axle load. Only for strut clamp Ø50mm. Only for cars with multilink rearaxle.
H&R Monotube Coil Over Kit Seat Cordoba/Ibiza 1999-/Volkswagen Polo 1999-2001 up to 92kW FA30-70/RA30-60mm
H&R Monotube Coil Over Kit Seat Cordoba/Ibiza 1999-/Volkswagen Polo 1999-2001 up to 92kW FA30-70/RA30-60mmH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Seat Cordoba Type 6K,6K/C, up to 95kW, including Diesel, model 2000 1999-Seat Ibiza Type 6K,6K/C, up to 95 kW, including Diesel, model 2000 1999-Volkswagen Polo Type 6N/6NF, up to 92kW, including Diesel 1999-2001Front axle 30-70mm/Rear axle 30-60mm.
H&R Monotube Coil Over Kit Seat Ibiza FA20-50/RA20-50mm/Volkswagen Polo FA40-60/RA40-70mm 2008- from 930kg FA-Load
H&R Monotube Coil Over Kit Seat Ibiza FA20-50/RA20-50mm/Volkswagen Polo FA40-60/RA40-70mm 2008- from 930kg FA-LoadH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Seat Ibiza including SC, -FR, Cupra, -Bocanegra, ST Type 6J 2008- Front axle 20-50/Rear axle 20-50mmVolkswagen polo Type 6R 2009- (not for Sport Select Suspension) Front axle 40-60/Rear axle 40-70mmFrom 930kg Front axle load.
H&R Monotube Coil Over Kit Seat Ibiza FA20-50/RA20-50mm/Volkswagen Polo FA40-60/RA40-70mm 2008- up to 929kg FA-Load
H&R Monotube Coil Over Kit Seat Ibiza FA20-50/RA20-50mm/Volkswagen Polo FA40-60/RA40-70mm 2008- up to 929kg FA-LoadH&R coilover suspensions offer race-bred performance without sacrificing ride comfort. These Monotube Coil-Overs feature a threaded shock body that allows height adjustments.Product benefits:Monotube gas shock absorbers for precise handling responseH&R precision wound progressive coil springsAdjustment wrenches includedTrapezoid threaded shock body allows almost infinite height adjustmentDurable corrosion protectionWith TÜV approvalHigh quality components for long service lifeMade in Germany:Seat Ibiza including SC, -FR, Cupra, -Bocanegra, ST Type 6J 2008- Front axle 20-50/Rear axle 20-50mmVolkswagen polo Type 6R 2009- (not for Sport Select Suspension) Front axle 40-60/Rear axle 40-70mmUp to 929kg Front axle load.